Biosignals Studio Mobile: How do I set up my device?

This step-by-step guide provides all the information needed to set-up your device in the new Bisoignals Studio Mobile application to get started for your first acquisition.

1. Connecting biosignalsplux devices

• Devices: To navigate to the devices section press the “Devices” button on the bottom of the screen.

• Scan Devices: To scan available devices near you, press the”Scan devices” button in blue and all available devices will appear in a list.

Note: Make sure your Bluetooth is switched on and your device is running.

• Pair Devices: To pair available devices from the list, select the device that you want to work with an it will appear under “Paired”.

• Device Settings: Click on the paired device to access the device settings. You will see your device with all connected sensors appearing in a new screen.

2. Setting up Device Parameters

• Sensors: You can enable and disable each connected sensors by moving the switch to the right or left,

• Battery: You can see the battery level of your device in different colours.

Full	Medium	Low
> 80%	80% ≤ level > 30%	≤ 30%

• Device name: You can change your devices name to a custom one in the “Device name” field,

• Frequency: You can choose a specific sampling rate from a list when clicking on the Frequency option in Hz,

• Resolution: When selecting the “Resolution” option, you can choose a different resolution in bit that fits your needs,

• Save Settings: Save your setting when changes and return to devices or restore to default settings with the two buttons below.

Note: Make sure to always save your settings after changing them.

Congratulations! You have successfully navigated through the steps on how to set-up your device in Biosignals Studio Mobile. Explore other related articles to get started with your acquisition!

---