What are the sampling rate options for biosignalsplux devices?

Using OpenSignals (r)evolution

Using our OpenSignals (r)evolution software you can select sampling rates of 10Hz, 20Hz, 50Hz, 100Hz to 1kHz (in 100Hz steps), or 1kHz to 3kHz (in 1kHz steps) for simultaneous use of up to 8 sensors per biosignalsplux hub. A 4kHz option is available for using up to 3 sensors simultaneously.

Using the PLUX APIs

Using the PLUX APIs, you can set the sampling rate to any integer value between 10Hz and 8kHz, although some additional limitations (e.g. limited number of channels) can occur at the higher end of the sampling rate spectrum.

Check out the biosignalsplux hub datasheet for further information on the sampling rate – channel dependency.