iMotions is the leading software for behavioral research and supports the use of 8-channel biosignalsplux devices.
This article guides you through the major steps to configure your biosignalsplux hub in the iMotions software.
For more iMotions articles with biosignalsplux, visit the iMotions Help Center.
What you’ll need
For this setup, you will need the following biosignalsplux products and an iMotions software license:
- 1x 8-channel biosignalsplux hub
- 1x Bluetooth Dongle (TP-Link UB500 or newer)
- Sensors of your choice
- 1x active license for the iMotions software
- 1x Windows PC
Step 1: Connect your biosignalsplux via Bluetooth
For the best Bluetooth experience, use the Bluetooth dongle provided with your biosignalsplux kit, even if your computer has an internal Bluetooth module.
Go to Bluetooth & Devices in your Windows PC. Follow the steps in the screenshot below:
Step 2: Connect your biosignalsplux to iMotions
Go to iMotions > Preferences > Sensor (6). Click the Discover button to scan for biosignalsplux devices (7). Once any biosignalsplux devices have been discovered, select your device from the dropdown list Devices (8).
Proceed with configuring your device according to the sensors connected to each port (9).
Ensure that both options Enable data collection and Forward samples (10) are active before completing the configuration.
Step 1: Connect your biosignalsplux via Bluetooth
Step 3: Preview & Record Sensor Data
Place your sensors on the subject and get ready for data collection.
In the study’s Sensors screen, you can preview your sensor data by clicking on the Sensor Preview button or by pressing the Start Recording button (12).
Additional Tutorials
You can find instructions for individual sensor placements in other articles of this support page or on the iMotions Help Center.
