Yes, but with some limitations. See the information below to find everything you need for your biosignalsplux hub.
4-Channel biosignalsplux Hubs
All analog sensors are compatible with the 4-channel hub allowing the user to connect up to 4 sensors to the analog sensor ports of the hub (green ports).
This hub also supports the use of 1 digital sensor (FNIRS or SpO2) which must be connected to the reference port (yellow port), where the common reference cable is usually connected.
8-Channel biosignalsplux Hubs
All analog sensors are compatible with the 8-channel hub allowing the user to connect up to 8 sensors to the analog sensor ports of the hub (green ports).
This hub also supports the use of 1 digital sensor (FNIRS or SpO2) which must be connected to the reference port (yellow port), where the common reference cable is usually connected. If a digital sensor is used, the number of possible analog sensors that can be used with the digital sensor is reduced to 7.
Accessories can be connected to the red port.
biosignalsplux Hybrid-8 Hubs
The ports of the Hybrid-8 hubs are hybrid ports, i.e. they work both with analog and digital sensors. All analog and digital sensors (FNIRS and SpO2) are compatible with the 8-channel Hybrid-8 hub allowing the user to connect up to 8 sensors to the any of the available ports of the hub (blue ports).
The reference cable can be connected to the reference port (yellow port). Accessories can be connected to the accessory port (red port).
